background image

2

Introduction

Preface

Dear customer, It is our desire that the 
good characteristics of the Phoenix 24 
should justify the confidence you de-
monstrated by making this purchase.
Prior to the first use, carefully read the 
chapter "Safety Information” as this will 
ensure your safe operation of the ma-
chine.
Your own safety, as well as the safety of 
others, depends to a great extent on 
how the machine is moved and opera-
ted. Therefore, this operation and main-
tenance manual must be read and 
understood prior to the machine being 
used for the first time.
The manual provides valuable informa-
tion about operation, service and 
maintenance. The warning symbols as 
used in this manual identifies items re-
levant to safety. Please observe the 
safety provisions (see chapter "Safety 
Information”).
Your authorized PowerBoss dealer will 
be pleased to answer further questions 
regarding the vehicle or the operation 
and maintenance manual.

Please be advised explicitly that we 
cannot accept any legal issues out of 
the contents of this manual.
If repair work has to be performed make 
sure that only genuine spare parts are 
used; only genuine spare parts may 
guarantee a dependable machine.
We reserve the right for technical im-
provement..

Valid as of: February 2010

PowerBoss Inc.
175 Anderson Street
Aberdeen, North Carolina 28315
U.S.A.

Proper use

The machine is a  vacuum scrubbing 
machine for wet cleaning of hard-sur-
faced floors. Using the machine beyond 
this scope of application will be deemed 
improper use; The manufacturer cannot 
be held liable for consequential dama-
ges; the user alone bears the risk.
The term of proper use also includes 
operation, maintenance and repair work 
to be performed in compliance with the 
manufacturer's specifications. 
The Phoenix 24 may only be used by 
persons that are familiar with the machi-
ne and aware of possible hazards 
involved.
If modifications to the machine are 
made in absence of the manufacturer's 
prior consent, the latter cannot be held 
liable for damage resulting from such 
unauthorized modification.

Introduction

Summary of Contents for Phoenix 24













































Reviews: