For Internal Office Use Only
3.1 CHECK AND SET MACHINE TYPE
1. Setting the correct machine type is absolutely necessary. To do so use
the
DIP-switch A on the control unit (A1).
2. For the B750R type the first and the last bar have to be positioned in
the top line
and the second and third bar in the bottom line. This setting results in
the
displayed cipher 9.
3. If the display does not correspond with these parameters, correct the
DIP-switch
combination.
B750R
1: ON
(= bars in top line)
2: OFF
(= bars in bottom line)
3: OFF
(= bars in bottom line)
4: ON
(= bars in top line)
