background image

PowerBoss, Inc. Copyright 2010

PB# 4100033  Rev.* 06/10

Armadillo 9X Series Sweeper                                                               

 

Page  37

WARRANTY

Revision F 

Effective November 1, 2008 

PowerBoss Made Simple Industrial Limited Warranty 

Minuteman  International  owner  of  PowerBoss  warrants  to  the  original  purchaser/user  that  the  product  is  free  from  defects  in  workmanship  and  materials 

under normal use. PowerBoss will, at its option, repair or replace without charge, parts that fail under normal use and service when operated and maintained 

in  accordance  with  the  applicable  operation  and  instruction  manuals.  All  warranty  claims  must  be  submitted  through  and  approved  by  factory  authorized 

repair stations. 

This warranty does not apply to normal wear, or to items whose life is dependent on their use and care. Parts not manufactured by PowerBoss are covered by and subject to 

the warranties and/or guarantees of their manufacturers. Please contact Minuteman International for procedures in warranty claims against these manufacturers. 

Special warning to purchaser

 -- Use of replacement parts not manufactured by PowerBoss or its designated licensees, will void all warranties expressed or 

implied. A potential health hazard exits without original equipment replacement.  

All warranted items become the sole property of Minuteman International or PowerBoss or its original manufacturer, whichever the case may be. 

PowerBoss  disclaims  any  implied  warranty,  including  the  warranty  of  merchantability  and  the  warranty  of  fitness  for  a  particular  purpose.  PowerBoss 

assumes no responsibility for any special, incidental or consequential damages. 

This limited warranty is applicable only in the U.S.A. and Canada, and is extended only to the original user/purchaser of this product. Customers outside the 

U.S.A. and Canada should contact their local distributor for export warranty policies. PowerBoss is not responsible for costs or repairs performed by persons 

other than those specifically authorized by PowerBoss. This warranty does not apply to damage from transportation, alterations by unauthorized persons, 

misuse  or  abuse  of  the  equipment,  use  of  non-compatible  chemicals,  or  damage  to  property,  or  loss  of  income  due  to  malfunctions  of  the  product.  If  a 

difficulty develops with this machine, you should contact the dealer from whom it was purchased. 

This  warranty  gives  you  specific  legal  rights,  and  you  may  have  other  rights,  which  vary  from  state  to  state.  Some  states  do  not  allow  the  exclusion  or 

limitation of special, incidental or consequential damages, or limitations on how long an implied warranty lasts, so the above exclusions and limitations may 
not apply to you

.

Travel*

Labor 

Parts

Engine

Extended Warranty

Costs

Walk behinds

Battery sweepers

Ninety days

One year

One year

N/A

2 years Parts + Labor (or 2000 Hours)

2%

IC sweepers

Ninety days  One year

One year

Through manufacturer

2 years Parts + Labor (or 2000 Hours)

2%

Battery scrubbers

Ninety days

Two years Three years

N/A

3 Years Parts + Labor (or 3000 Hours)

2%

Riders

Battery scrubbers

Ninety days

Two years Three years/2000 hrs N/A

3 Years Parts + Labor (or 3000 Hours)

2%

IC sweeper/scrubbers

Ninety days

Six months Two years/2000 hrs

Two years/3000 hrs**

2 years Parts + Labor (or 2000 Hours)

3%

IC sweepers

Ninety days

Six months Four years/3000 hrs

Five years/3000 hrs**

Exceptions

Apex series sweeper

Ninety days

One year

One year/1000 hrs

One year/1000 hrs**

2 years Parts + Labor (or 2000 Hours)

3%

6X sweeper

Ninety days

Six months Two years/2000 hrs

Two years/2000 hours**

2 years Parts + Labor (or 2000 Hours)

3%

4 Years Parts + 2 Years Labor (or 4000 

Hours)

3%

Tank Bladders 

Eight years/ no additional labor 

Polypropylene plastic tanks 

Ten years/ no additional labor 

Batteries 

0-3 months full replacement, 4-12 prorated credit 

Chargers 

 

One-year replacement 

Replacement parts 

 

Ninety days 

 

*Two-hour cap 

**Through engine manufacturer. See section 3 of warranty manual for engine warranty exceptions 

*** Based upon dealer’s certification status 

Extended Warranty MUST be signed up within 30 days of delivery to End User (Dealer has 1Year from Receiving Machine to Sign up extended Warranty) 

Extended Warranty Cost is based on Invoice Price multiplied by the Percentage listed in the Extended Warranty Column 

All above labor and travel reimbursed at 65 or 75% of the published shop rate.

Summary of Contents for 9XDLXDSLBR







































Reviews: