10
PB450 US - W18XC1053/US - Revised 030113
14 - Maintain tools with care
Keep cutting tools sharp and clean for better and safer performance.
Follow instruction for lubricating and changing accessories.
Inspect tool cords periodically and if damaged have them repaired by an authorized
service facility.
Inspect extension cords periodically and replace if damaged. Keep handles dry,
clean and free from oil and grease
.
15 - Disconnect tools
When not in use, before servicing and when changing accessories such as blades,
bits and cutters, disconnect tools from the power supply.
16 - Remove adjusting keys and wrenches
Form the habit of checking to see that keys and adjusting wrenches are removed
from the tool before turning it on.
17 - Avoid unintentional starting
Ensure switch is in "off" position when plugging in.
18 - Use outdoor extension leads
When the tool is used outdoors, use only extension cords intended for outdoor use
and so marked.
19 - Stay alert
Watch what you are doing, use common sense and do not operate the tool when
you are tired.
20 - Check damaged parts
Before further use of tool, it should be carefully checked to determine that it will
operate properly and perform its intended function.
Check for alignment of moving parts, binding of moving parts, breakage of parts,
mounting and any other conditions that may affect its operation.
A guard or other part that is damaged should be properly repaired or replaced by an
authorized service centre unless otherwise indicated in this instruction manual.
Have defective switches replaced by an authorized service centre.
Do not use the tool if the switch does not turn it on and off.
21 - Warning
The use of any accessory or attachment other than one recommended in this
instruction manual may present a risk of personal injury.
22 - Have your tool repaired by a qualified person
This electric tool complies with the relevant safety rules. Repairs should only be
carried out by qualified persons using original spare parts, otherwise this may result
in considerable danger to the user.
GENERAL SAFETY - CONT.
