Powerbond TR55 LCD, Operating Instructions Manual

Page: 6 / 14

P
OWERBOND
Art.Nr. 9109
6
Safety Measures in Case of Normal Operation
The instrument must only be used by persons trained and instructed and being allowed to use it. They have
to know the operating instructions and be able to work accordingly.
Prior to each use, check the gun for visible damage and make sure that it is in perfect condition! Advise de-
tected defects to your superior at once!
Safety Instructions for the Use of Holt-Melt Glue Gun TR 55 LCD
*
Fill tank only up to 1.5 cm below upper rim.
* Never exceed operating temperature of the hot melt.
Overheating may lead to decomposition which may affect health.
Compressed air pressure max. 6 bars
* Once the gun has warmed up, nozzle and cover are extremely hot!
* Never start working without having mounted a nozzle.
* Do not direct glue jet towards people.
* Prior to any nozzle replacement, unplug connecting cable.
* When replacing a nozzle, liquid glue might leak out. Warning: Risk of burning!
* Never bring the hot nozzle into contact with the cable.
* When your skin got into contact with hot glue, immediately cool it with cold water.
Do not try to remove hot melt from the skin first. If necessary consult your doctor.
When hot adhesive got into your eyes, immediately cool them under running water for
about 15 minutes and consult your doctor at once.
If the vent valve does not audibly de-aerate, hot glue might flow off the sound absorber
after the trigger has been operated.
Always wear protective gloves!
Note: - Do not lay gun on its side
- Fill tank only up to max. 1.5 cm below upper rim
- Gun must de-aerate audibly
- Always de-aerate before lid is opened
- Do not direct glue jet towards people
- Do not hold nozzle top upwards
- Never work without having mounted a nozzle
- Do not carry out overhead work
- Stop using the instrument, if casing is damaged due to shock,
breakage or heavy wear
* Even if the gun has been switched off, it may be under pressure and glue may flow off.