P
OWERBOND
Art.Nr. 9109
5
General Safety Instructions
User’s Care and Diligence
The Glue Gun has been designed and fabricated according to the applicable harmonized standards and
further technical specifications. So, it is state of art and ensures a maximum of safety.
This safety, however, can only be achieved in practice, if all necessary measures have been taken. The user
of the device shall be obliged to plan these measures and to make sure that they are taken.
In particular, the user shall ensure that
-
the gun is in working order
-
the required personal protective equipment (protective gloves) for the operating personnel is available
and used
-
the entire operating instructions are in legible condition and available to the operator
-
only sufficiently qualified and authorized personnel operates and maintains the gun
-
this personnel is regularly instructed in the applicable aspects of operational safety and environmental
protection, and knows the operating instructions and, in particular, the safety instructions.
Make the information available:
This operating manual shall be kept on the site of operation. It must be ensured that all persons operating
the gun can look into the manual at any time. In addition to the operating manual, the instructions pursuant
to the Factory Act and the regulations as regards the use of equipment shall always be at the operator’s
disposal.
Meaning of the Various Safety Symbols
This operating manual shall give concrete advice as to safety to draw the user’s attention to remaining un-
avoidable hazards. These hazards imply dangers to
•
persons
•
product and equipment
The symbols used in the operation manual shall, in particular, call attention to the safety instructions!
This symbol indicates that there is, above all, danger to persons, but also to
equipment and material.
Caution: Hot surface!
Accident Prevention Regulations VBG 125 - W26
Hot surfaces such as machine parts, tanks or materials, but also hot liquids cannot
always be perceived. The utmost caution is advised when this symbol is attached
to a component.
Always wear protective gloves when you have to touch hot
surfaces.
Summary of Contents for TR55 LCD
Page 12: ...POWERBOND Art Nr 9109 12...
Page 14: ...POWERBOND Art Nr 9109 14...
