background image

POWERBASS ELECTRONICS LIMITED WARRANTY POLICY

PowerBass USA, Inc. offers limited warranty on PowerBass products under normal use on the following terms:

PowerBass Xtreme Electronics are to be free of defects in material and workmanship for a period 
of one (1) year.

This warranty applies only to PowerBass products sold to consumers by Authorized PowerBass Dealers in the United 
States of America.  Products purchased by consumers from a PowerBass dealer in another country are covered only 
by that country’s Distributor and not by PowerBass USA.

This warranty covers only the original purchaser of PowerBass product.  In order to receive service, the purchaser must 
provide PowerBass with the receipt stating the consumer name, dealer, product and date of purchase.

Products found to be defective during the warranty period will be repaired or replaced (with a product deemed to be 
equivalent) at PowerBass’s discretion and will not be liable for incidental or consequential damages. PowerBass will 
not warranty this product under the following situations:

  

• Electronics received with apparent rust or corrosion

 

 

• Any evidence of liquid damage or exposure to excessive heat

 

 

• Attempted repairs or alterations of any nature

 

 

• Product that has not been installed according to this owners manual

Any implied warranties including warranties of fitness for use and merchantability are limited in duration to the period 
of the express warranty set forth above.  Some states do not allow limitations on the length of an implied warranty, so 
this limitation may not apply.  No person is authorized to assume for PowerBass any other liability in connection with 
the sale of this product.

Please call (909) 993-5399 for PowerBass Customer Service.

  You must obtain an RA# (Return Authorization Num-

ber) to return any product to PowerBass. The RA number must be prominently marked on the outside of the shipping 
carton or the delivery will be refused.  Please pack your return carefully; we are not responsible for items damaged 
in shipping.  Return the defective product along with a copy of the original dated retail sales receipt, plus $12.00 for 
handling and diagnostic evaluation to:

PowerBass USA, Inc., 
Attn: Returns (RA#__________)
13936 Mountain Avenue, Chino, CA  91710

Residents of HI, AK and US territories will be charged for return shipping.  All inquires regarding service and warranty 
should be sent to the above address.

Removed or altered serial numbers will void this warranty

Summary of Contents for Xtreme XEX-23

























Reviews: