2. Using Two Pair of Inputs
When front and rear pairs of inputs are available input the signals into the FRONT and REAR
inputs, respectively. Set the SUBWOOFER INPUT switch to the FRONT position to allow the
signals to be fed internally to the SUBWOOFER section to give proper outputs and set the
INPUT MODE switch to FRONT/REAR to allow the head unit to control the fader. The FRE-
QUENCY MULTIPLIER switch should be in the X1 position on both FRONT and REAR.
2-channel amp for FRONT
2-channel amp for REAR
mono amp for SUBWOOFER
IMPORTANT: Correctly set the switches as shown in the diagrams below.
13
