MIN
MAX
Remote Bass Knob
Input Side
Output Side
Power Connections: Use the convenient Power Plug to wire up the Power, Ground and Remote Turn-on as
follows:
: Insert an 16 gauge or larger wire into the plug for the 12 volt (+) position. He
other end should be connected to a good, fused, constant 12V DC positive source.
REMOTE:
Connect a 22 to 16 gauge wire from the Radio’s (head unit) remote turn-on
lead.
GROUND:
Use the same gauge wire as you did for the positive connection and run it from
the “Ground” connector to a single ground (-) location point where the amplifiers are also
grounded.
Once you have completed wiring the Power Plug, gently push it into the socket on the side panel of the
PowerBass XEX-23.
POWER CONNECTION
Power Plug
Choose the correct length and style of RCA interconnects for your needs (not included). Run the RCA cables
from the head unit to the location of the PowerBass XEX-23. Make sure all the RCA cables are run on the
opposite side of the vehicle from where you ran the power cables to the amplifier(s). Hiss, engine noise, and
fan noise can easily be picked up through the RCA cables if run incorrectly.
Attach the RCA cable from the amplifier(s) to the OUTPUT jacks on the side panel of the processor.
RCA INTERCONNECTS
