21
Operation
Starting
WARNING! Do not start the unit until it has been completely
assembled. Danger of injury!
WARNING! Do not operate the device unless you did not
find any faults. If a part has become defective, make sure to
replace it before you use the device again.
Installing the battery pack
Keep the battery pack in line with the holder on the device.
Push it forward until it reaches the bottom. Before starting, make
sure the battery pack is firmly locked in place.
Switch on/off
Press and hold the safety lock-off button (a) and then press the
trigger (b) on the handle.
Adjusting line length while working
This machine is fitted with a ‘Tap & Go’ head. To release more line,
tap the cutting line head against the ground with the motor at top
speed; the line will be released automatically and the knife will cut
off the excess length.
a
b
