13
4111-0034 — Sept. 2018
© 2018 Systems, LLC
A— Lifting Bracket (2 used)
B — Shipping Bands
Poweramp dock levelers are shipped with lifting
brackets (
A
) fastened to the platform side joists,
and shipping bands (
B
) around the platform lip and
leveler frame (see Figure 6).
1. Remove any bumpers and/or control panels that
may be banded to the frame of the dock leveler.
Note:
Overall width of platform and lifting brackets
(
A
) must be kept to a minimum to prevent
interference between the lifting brackets and the pit
walls as the dock leveler is lowered into the pit.
2. Make sure the mounting hardware of lifting
brackets (
A
) is snug. The brackets should pivot
without binding on the mounting cap screw.
3. Attach lifting chains to lifting brackets (
A
) and to
a lifting device (i.e., hoist or fork truck) having the
appropriate lifting capacity and reach.
4. Remove wood blocks that are attached to the
leveler frame before putting the dock leveler into the
pit.
5. Proceed to “Install Dock Leveler” on Page 14.
DO NOT over-tighten the lifting bracket hardware.
Over-tightening can damage the weather seal, if
equipped.
DO NOT remove the shipping bands (B) around
the platform lip and leveler frame at this time. The
shipping bands are needed to hold the leveler
together during the installation process.
Prepare Dock Leveler
A
B
INSTALLATION
Figure 6
Summary of Contents for CentraAir
Page 21: ...19 4111 0034 Sept 2018 2018 Systems LLC This page intentionally left blank INSTALLATION...
Page 53: ...51 4111 0034 Sept 2018 2018 Systems LLC PARTS This page intentionally left blank...
Page 54: ...52 4111 0034 Sept 2018 2018 Systems LLC MISCELLANEOUS This page intentionally left blank...
