Power Wheels BOSS 302 Mustang Owner'S Manual Download Page 20

20

W9257pr-0920

FCC STATEMENT

United States Only

This equipment has been tested and found to comply 

with the limits for a Class B digital device, pursuant to 

Part 15 of the FCC Rules. These limits are designed 

to provide reasonable protection against harmful 

interference in a residential installation. This equipment 

generates, uses and can radiate radio frequency energy 

and, if not installed and used in accordance with the 

instructions, may cause harmful interference to radio 

communications.However, there is no guarantee that 

interference will not occur in a particular installation.  

If this equipment does cause harmful interference to 

radio or television reception, which can be determined  

by turning the equipment off and on, the user is 

encouraged to try to correct the interference by one or 

more of the following measures: 

•  Reorient or relocate the receiving antenna.

•  Increase the separation between the equipment  

and receiver.

•  Consult the dealer or an experienced radio/TV 

technician for help.

Note: Changes or modifications not expressly approved 

by the manufacturer responsible for compliance could  

void the user’s authority to operate the equipment. 

This device complies with Part 15 of the FCC Rules. 

Operation is subject to the following two conditions: 

(1) this device may not cause harmful interference and 

(2) this device must accept any interference received, 

including interference that may cause  

undesired operation.

ICES-003 

This Class B digital apparatus complies with Canadian 

ICES-003. Operation is subject to the following two 

conditions: (1) this device may not cause harmful 

interference and (2) this device must accept any 

interference received, including interference that may 

cause undesired operation.

NMB-003

Cet appareil numérique de la classe B est conforme  

à la norme NMB-003 du Canada. L’utilisation de ce 

dispositif est autorisée seulement aux conditions 

suivantes: (1) il ne doit pas produire de brouillage et  

(2) l’utilisateur du dispositif doit être prêt à accepter  

tout brouillage radioélectrique reçu, même si ce 

brouillage est susceptible de compromettre le 

fonctionnement du dispositif.

Bumper-to-Bumper* Limited Warranty

 

*One year limited warranty from the date of 

purchase on the Power Wheels

®

 vehicle.

Six month limited warranty on the  

12 volt battery.

For the original purchaser, this one year limited warranty 

covers the Power Wheels

®

 ride-on vehicle (purchased 

from Power Wheels

®

) against defects in materials and 

workmanship. The six month limited warranty applies 

only to the 12 volt battery included by Power Wheels

®

 

with the original purchase of the vehicle. This warranty 

covers normal use and does not cover the  

Power Wheels

®

 vehicle or battery if damaged by 

unreasonable use, neglect, accident, abuse, misuse, 

improper service or other causes not arising out of 

defects in materials or workmanship. Evidence of any 

attempt at consumer repair will void this warranty.  

THIS WARRANTY DOES NOT COVER, AND IS 

INTENDED TO EXCLUDE, ANY LIABILITY ON THE 

PART OF POWER WHEELS

®

, WHETHER UNDER THIS 

WARRANTY OR IMPLIED BY LAW FOR ANY INDIRECT 

OR CONSEQUENTIAL DAMAGES FOR BREACH OF 

WARRANTY. SOME STATES DO NOT ALLOW THE 

EXCLUSION OR LIMITATION SO THIS LIMITATION  

MAY NOT APPLY TO YOU

Should you need service or assistance with your vehicle 

during the warranty period, do not return the vehicle 

to the store. Power Wheels

®

 has provided a nationwide 

network of authorized service centers. If there is not an 

authorized service center in your area, please visit us 

on-line at 

www.powerwheels.com

 or call Consumer 

Relations for information, 

1-800-348-0751

.

This warranty gives you specific legal rights, and you may 

also have other rights which may vary from state to state.

PLEASE SAVE YOUR ORIGINAL SALES RECEIPT.

LIMITED WARRANTY

•  Check all screws and their protective coverings 

regularly and tighten as required. Check plastic parts  

on a regular basis for cracks or broken pieces. 

•  During snowy or rainy weather, the vehicle should be 

stored inside or under a protective cover.

•  Avoid operating the vehicle in wet or snowy conditions. 

Water or moisture in the motors or electrical switches  

can cause them to corrode, and could cause switch  

or motor failure. 

•  Avoid operating the vehicle on sand, loose dirt or 

gravel. Sand, loose dirt or gravel in the motors or 

electrical switches can cause them to jam, and could 

cause switch or motor failure.

•  The vehicle can be wiped down with a soft, dry cloth. 

For a shiny finish, you can wipe plastic parts with  

a non-wax furniture polish applied to a soft cloth.  

Do not use automotive wax. Do not use soap and  

water or spray the vehicle with a hose. 

•  To ensure your vehicle stays in good operating order, 

we recommend you periodically have your vehicle 

checked by a Power Wheels

®

 authorized service center.  

VEHICLE CARE

Summary of Contents for BOSS 302 Mustang

























Reviews: