12
W9257pr-0920
ASSEMBLY
Short Seat Belts
Seat
Long Seat Belt
• Fit the tabs on the rear deck into the slots in the back
end of the vehicle.
• Insert the tabbed end of a short seat belt through the
slot near the outer edge of the seat. Make sure the
side of the seat belt with the fastener faces the outer
edge of the seat.
• Do not insert the second tab on the short seat belt. Pull
up on the short seat belt to be sure it’s secure.
• Repeat this procedure to assemble the other short seat
belt strap.
• Insert each fastener end of the long seat belt through
each slot in the center of the seat. Make sure the
fasteners face the outer edge of the seat.
• Pull each side of the long seat belt strap evenly
through the slots. Make sure to pull the tabs on the
long seat belt through the slots.
19
20
BACK VIEW
Rear Deck
• Fit the long tabs on the hood into the slots in the front
end of the vehicle.
• Pull the hood forward and lower.
Note:
The hood is held down by magnets. Simply lift
to open the hood. Do not use around items that are
sensitive to or affected by magnetic fields.
17
18
Hood
FRONT VIEW
• Fit the spoiler onto the pegs on the rear deck.
• Insert four #8 x ¾" (1,9 cm) screws into the rear deck
and tighten.
Rear Deck
Spoiler
