INSTALLATION & OPERATION
①
Package Contents
Before installation, please read and understand the following items are inside the box:
·UPS unit
·User manual
·Communication cable
·Software for UPS
②
Connect to Utility Power
Connect AC power cord to utility power. Then, the UPS will start to charge inside battery. For
best result, charge the battery for 24 hours prior to initial use.
③
Plug in Equipment
Plug your equipment to Battery Backup Outlets on the rear panel of the UPS.
NOTE:
Make sure that the UPS is powered on to protect all important devices from data
loss during power failure.
CAUTION:
NEVER
connect a laser printer or scanner to the battery backup outlets of UPS.
This way cause the damage of the unit.
④
Connect Communication Cable
To allow for unattended UPS shutdown/start-up and status monitoring, connect the
communication cable one end to the USB port and the other to the communication port of
your PC. With the monitoring software installed, you can schedule UPS shutdown/start-up
and monitor UPS status through PC.
⑤
Turn On/Off the UPS
Turn on the UPS unit by pressing the power switch. Then, the LCD will display UPS status.
Turn off the UPS unit by pressing again the power switch. Then, LCD display will shut off.
⑥
Turn On/Off the LCD screen
When the UPS in AC mode. Press on the power switch once, the LCD screen will shut off.
Press on the power switch once again, the LCD screen will be on.
⑦
Mute function
In battery mode, press on the power switch once, the buzzer will be off. But when the UPS is
low battery or overloaded, the buzzer will be on to remind the UPS will be shut down
immediately.
Summary of Contents for PS-PGU1500VA#2B9A
Page 1: ......
Page 5: ...1 Output socket 2 USB port 3 Circuit breaker 4 AC input ...
Page 11: ......
