9
ASSEMBLY
WARNING:
Disconnect air line from tool and remove fasteners from magazine before
making adjustments or personal injury may result.
AIR FITTING
This tool uses a 1/4" N.P.T. male plug. The inside diameter should be 0.180" (4.6 mm) or larger. The
fitting must be capable of discharging tool air pressure when disconnected from the air supply.
WARNING
:
Always use couplings that relieve all pressure from the tool when it is
disconnected from the power supply
. Always use hose connectors that shut off air supply
from compressor when the tool is disconnected.
TO INSTALL AN AIR FITTING
1.
Wrap the male end of the fitting with thread seal tape prior to assembly to eliminate air leaks.
2.
To install a 1/4" (6.4 mm) fitting: screw it directly into the air inlet and tighten firmly.
NOTE:
If an
adapter is in the air inlet, remove it prior to inserting the fitting.
OPERATING INSTRUCTION
WARNING:
Read and thoroughly understand all instructions and safety information before
operating this framing nailer. Failure to do so may cause serious injury or death. Do not allow
anyone to operate this framing nailer who has not read this manual. a framing nailer can be
dangerous if assembled or used improperly. Do not operate this framing nailer if you have doubts or
questions concerning safe operation. Call our customer service department at 1-800-791-9458 to address
these concerns.
WARNING:
Always wear safety glasses, safety gloves, safety shoes and suitable work
clothing when operating this impact wrench. Do not wear jewelry, neckties or other loose
clothing which could get caught in moving parts
PowerSmart PS6120 Pneumatic Framing nailer drives 21-degree round head framing nails from 2" to
3-1/2" (50 mm to 90 mm) in length. The tool has a die cast aluminum body for strong and light weight
design. The tool features a comfortable rubber handle for improved control and comfort even during
extended use and a contact safety to prevent accidental firing and an adjustable depth for various
applications.
