7
Avoid accidental starting. Be sure switch is off before connecting to power source and/ or battery
pack, pick up or carrying the tool. Carrying power tools with your finger on the switch or energizing
power tools that have the switch on invites accidents.
Remove any adjusting key or wrench before turning the power tool on. A wrench or a key left
attached to a rotating part of the power tool may result in personal injury.
Do not overreach. Keep proper footing and balance at all times. Proper footing and balance enable
better control of the power tool in unexpected situations.
Do not stand on tool or its stand. Serious injury may occur if the tool is tipped or if the cutting tool is
accidentally contacted. Do not store materials on or near the tool such that it is necessary to stand on
the tool or its stand to reach them.
POWER TOOL USE AND CARE
Use clamps or other practical way to secure and support the workpiece to a stable platform. Holding
the work by hand or against your body is unstable. It allows for work to shift, causes binding of the
tool and loss of control.
Do not force tool. Use the correct tool for your application. The correct tool will do the job better and
safer at the rate for which it is designed.
Do not use the tool if switch does not turn it on or off. Any tool that cannot be controlled with the
switch is dangerous and must be repaired.
Disconnect the plug from the power source before making any adjustments, changing accessories, or
storing the tool. Such preventive safety measures reduce the risk of starting the tool accidentally.
Keep cutting tools sharp and clean. Properly maintained tools, with sharp cutting edges, are less
likely to bind and easier to control. When mounting saw blades be certain that the arrow on the blade
matches the direction of the arrow marked on the tool and that the teeth are also pointing in the same
direction.
Inspect guards before using a tool. Keep guards in place. check moving parts for binding or any other
condition that may affect the normal operation or safety features of the tool. if damaged, have tool
serviced before using the tool. Many accidents are caused by poorly maintained tools.
Do not alter or misuse tool. Any alteration or modification is a misuse and may result in serious
personal injury.
The use of any other accessories not specified in this manual may create a hazard. Accessories that
may be suitable for one type of tool, may become hazardous when used on an inappropriate tool.
Store idle power tools out of reach of children and other untrained persons. Power tools are
dangerous in the hands of untrained users.
Save these instructions. Refer to them frequently and use them to instruct others who may use this
tool. If you lend this tool to someone else, also lend them these instructions.
SERVICE
Tool service must be performed only by qualified repair personnel. Service or maintenance
performed by unqualified personnel could result in a risk of injury.
When servicing a tool, use only identical replacement parts. Follow instructions in the Maintenance
section of this manual. Use of unauthorized parts or failure to follow Maintenance Instructions may
create a risk of electric shock or injury.
Summary of Contents for PS3030
Page 2: ...2 ...
Page 19: ...19 EXPLODED VIEW ...
