!
WARNING:
THE MACHINE CONTAI
NS NO USER-SERVICEABLE PARTS.
PLEASE CONTACT AN
AUTHORIZED POWERPLATE
®
SERVICE PROFESSIONAL FO
R ANY MAINTENANCE OR T
ROUBLESHOOTING NOT
OTHERWISE DESCRIBED BELOW, O
R PERSONAL INJURY OR DAMAGE T
O THE MACHINE COULD RESULT.
8 of22
9 of22
!
CAUTION:
Any changes, modifications
or unauthorized maintenance performed
to or on the machine could void the pro
duct warranty.
•
Always unplug the machine and then
wait for at least one minute before p
erforming any maintenance.
•
Clean the machine only with a moist cl
oth. Do not use sharp objects, bristles, s
crubs or acid-based detergents, which
will damage the lacquer finish.
•
Do not spray any cleaning solution
directly onto the machine. Instead,
moisten a cloth, then apply to the
machine.
•
On plastic components, use only p
olishes specifically designed for pla
stic. Use a soft brush, not a cloth, to
clean the platform, including the c
ontoured mat.
•
Clean electrical components only with
a dry cloth, in order to avoid the risk of
shock or damage to the components.
Troubleshooting
•
Always unplug the machine and then
wait for at least one minute before p
erforming any troubleshooting.
•
If the machine is not operational and the
console display is not illuminated, check
the power connections to the machine.
•
If all power connections are working, ple
ase check the circuit breaker or fuse for t
he electrical outlet that is supplying powe
r to the machine in order to ensure thatth
e outlet is receiving electrical power.
•
If the console display is illuminated, but
the platform will not vibrate, unplug the
machine, wait at least one minute, then
check the connection to the
machine’s
motor, located under the base of
the machine.
•
If the machine makes a rattling noise,
unplug the machine, wait at least one
minute, then check to make sure that
the feet are properly tightened.
! DANGER:
The user nottry to resolve
any electrical issues regarding the power
source to the machine. Instead, Power
Plate requests that the user contact
a licensed, professional electrician to c
onduct any examination and make any
necessary repairs. Otherwise, serious p
ersonal injury or property damage coul
d result. No modification for this equip
ment is allowed.
Maintenance
APPLIED PARTS:
applied parts are not i
ntended to deliver heat during normal
use. The maximum temperature for ap
plied part may be up to 43degrees Cel
sius / 109.4 degree Fahrenheit.
Applied Parts:
•
Platform
•
Handlebars
Power On /Off
:
•
To Power On the Machine: Press the
rocker switch located on lower back of
the columnto indicate
“I”
position.
•
To Power Off the Machine: Press the
rocker switch located on lower back of
the column to indicate
“
0
”
position.
•
To Power Off the Main Control Panel: W
hile power to the machine is on, press an
d hold the green power button located o
n the lower half of the main control pan
el. This will power off only the main cont
rol panel for standby mode. Press and h
old the green power button again to po
wer on the main control panel.
Pro7 Box Contents
Straps Set (2pcs)
Exercise Mat Pro
tection Cover Po
wer Cord Handg
rips (2pcs)
Box Contents
Summary of Contents for pro7
Page 1: ...pro7 Model...
