INTegral Line-Interactive Uninterruptible Power Supply Unit
—1.5kVA-T
Power Innovations
27
8.2—Warranty Claims
8.2.1
—Proof of Purchase
Proof of purchase will be required by Power Innovations to substantiate date of purchase. Such proof of purchase
must be an original bill of sale or receipt containing name and address of seller, purchaser, and the serial number of
the product.
8.2.2
—Notifying Power Innovations
Within a reasonable time, but in no case to exceed thirty (30) days after discovery of a defect, the purchaser shall
contact Power Innovations at 801-785-4123. Subject to the limitations specified herein, a Power Innovations service
representative will determine the appropriate course of action to repair the non-conforming product warranted
hereunder.
8.2.3
—Product Shipping
If it is determined that the product or part must be shipped back to the manufacturer for repair, the purchaser will
assume liability and pay for shipping to Power Innovations or an authorized service center. Power Innovations or an
authorized service center will pay for shipping to return the repaired product to the customer.
8.24
—Prior Approval
All products returned for service MUST have prior approval and an RMA number. If it is deemed necessary to return
this equipment to the factory for servicing, contact the Power Innovations Service Department for authorization and
an RMA number.
8.3—Limitation of Remedies
Power Innovations’ entire liability and the User’s exclusive remedy will be repair or replacement of the unit if all conditions
described under
8.1
—Limited Warranty
have been met.
8.3.1
—Indirect Damages
In no event will Power Innovations be liable for indirect, special, incidental, consequential, or exemplary damages of
any kind whatsoever arising out of the use of this unit, including (without limitation) lost profits, business interruption,
or loss of data, whether any claim is based upon theories of contract, negligence, strict liability, tort, or otherwise.
8.4—Customer Service
Questions concerning the operation, repair, or maintenance of this equipment should be directed to the Power Innovations
Service Department. When making such an inquiry, provide the Service Department with the model number, serial
number, and approximate date that the equipment was received.
It is often unnecessary to return a failed piece of equipment since this equipment uses plug-in type assemblies
throughout. Replacement assemblies for systems covered by this manual are usually in stock at the factory and available
for immediate shipment.
