background image

INTegral Line-Interactive Uninterruptible Power Supply Unit

—1.5kVA-T

                                     

Power Innovations

        11 

       4—Operating the Unit 

 
 

4.1—Operating Cautions 

 
While operating the unit, be sure that it has adequate ventilation space. Be sure the operating area is left free of clutter or 
other objects that may block ventilation slots. Do not block off ventilation openings in the casing. 
 
Avoid placing liquids or flammable gases near the unit during operation. 
 
Keep the unit far away from sources of natural or artificial heat, and make sure that the system is not overloaded. 
 
 
 
 
 

ELECTRICAL WARNINGS 

 

Do not expose the UPS to flammable gases or corrosive liquids. 
 
Ensure that no liquids of any kind enter the UPS unit. 

 

Caution 

 
Do not disconnect the main cable or unplug the unit from the wall outlet unless all breakers have 
been turned OFF. Doing so will cause the system to switch to backup mode and drain the batteries. 
 
Do not block ventilation openings in the casing. 
 
Keep objects from within four (4) inches on all visible ventilation holes in the UPS. The added space 
helps the unit ventilate. 
 
Keep the UPS far away from sources of heat (for example, heaters or direct sunlight). 
 
Keep the load within the correct operating range. 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Summary of Contents for MNL105-153T

































Reviews: