6—Specifications
Capacity (VA/Watt)
1.5kVA/938W
Model Type
Tower
Input
Nominal Voltage
100/110/115/120VAC
Voltage
Range
Acceptable Voltage
Range
85VAC~150VAC
Frequency
45 ~ 70 Hz Auto-sensing
Boost Transfer
85/94/97.8/102 VAC ± 2%
Boost Return
90/99/102.8/107 VAC ± 2%
Buck Transfer
115/126/132/132 VAC ± 2%
Buck Return
110/121/127/127 VAC ± 2%
Low Voltage Transfer
74/81/85/89 VAC ± 2%
Low Voltage Return
79/86/90/94 VAC ± 2%
High Voltage Transfer
130/143/150/150 VAC± 2%
High Voltage Return
125/138/145/145 VAC ± 2%
Output
Voltage
100/110/115/120 VAC re-settable via LCD panel
Voltage
Regulation
Line Mode
± 15%
Battery Mode
<3% RMS for entire battery voltage range
Frequency
Regulation
Line Mode
Synchronize to AC Mains
Battery Mode
50 Hz or 60 Hz ± 0.1 Hz
Power Factor
0.625
Wave Form
Pure sine wave
Efficiency
Line Mode
> 98%
Battery Mode
> 80%
Overload
Protection
Line Mode
> 110%, then buzzer alarm and amber LED blink continuously
Battery Mode
110%~150% for 30 seconds, >150% for 200ms, then UPS shuts down
Short
Circuit
Protection
Line Mode
Circuit breaker
Battery Mode
Electronic circuit
DC Start
Cold Start
Yes
Transfer Time
Typical
< 4 ms
Battery
Battery Voltage
36VDC
Battery Type
7AH
Battery Quantity
3pcs
Backup Time
At Half Load
> 10 min
At Full Load
> 3 min
Recharging Current
0.1C~0.3C
Control Panel
LCD Display
UPS status, I/P&O/P Voltage Frequency, Load Level, Battery Voltage & Level, Temperature, Model
LED Display
Normal (Green)
Warning (Amber)
Fault (Red)
Audible Alarm
Battery Mode
Beeping every 4 seconds
Low Battery
Beeping every second
UPS Fault
Beeping continuously
Overload
Beeping twice per second
Communication
Interfaces
Standard
RS-232
Multi-Interfaces Card (Option)
Various combination of RS-232, SNMP, USB, Dry Contact, AS400, MODBUS, Enable at the same time
Environment
Operation Temperature
0–40°C; 32–104
°F
Relative Humidity
0–95% non-condensing
Audible Noise
Less than 55dBA (at 1m)
Physical
(WxHxD) mm
145*215*431
Net Weight (kgs)
17.5
NEMA Outlets (100/110/115/120 VAC)
4
Safety
Conformance
Safety Standard
EN62040-1-1
EMC
EN62040-2
Marks
CE
