8976052
MINIMIG 100E Flux-Cored Welder
V4.0
2
For technical questions call 1-800-665-8685
SPECIFICATIONS
Input Voltage
120V AC
Duty Cycle
20% at 80A
Metal Type
Steel
Output Current
60 to 80A (peak 125A)
Max. Amperage Draw
125A
Current Range
60 to 80A (peak 125A)
Mild Steel Weld Thickness Range
18 gauge to 3/16 in.
AC/DC Output
AC
Generator Compatible
Yes
Electrode Type
Flux core wire
Electrode Size
0.030 / 0.035 in.
Dimensions
17.56 x 9.65 x 14.37 in.
INTRODUCTION
Your new MIG (Metal Inert Gas) wire feed welder is designed for maintenance
and sheet metal fabrication. The welding unit consists of a single-phase power
transformer, stabilizer, rectifier and a wire feeder. The welding unit features a
stepless wire feed speed setting and includes thermal protection.
SAFETY
WARNING! Read and understand all instructions before using this tool. The
operator must follow basic precautions to reduce the risk of personal injury
and/or damage to the equipment.
Keep this manual for safety warnings, precautions, operating or inspection and
maintenance instructions.
HAZARD DEFINITIONS
Please familiarize yourself with the hazard notices found in this manual. A
notice is an alert that there is a possibility of property damage, injury or death
if certain instructions are not followed.
DANGER!
This notice indicates an immediate and specific hazard that will
result in severe personal injury or death if the proper
precautions are not taken.
WARNING!
This notice indicates a specific hazard or unsafe practice that
could result in severe personal injury or death if the proper
precautions are not taken.
