V1.0
20V 4-1/2 in. Li-ion Cordless Mini Circular Saw
9049065
Visit www.princessauto.com for more information
11
until the blade comes to a complete stop. Never attempt to remove the
saw from the workpiece or pull the saw backward while the blade is in
motion as kickback may occur. Investigate and take corrective actions
to eliminate the cause of blade binding.
6. When restarting a saw in the workpiece, center the saw blade in the
kerf and check that saw teeth are not engaged into the material. If saw
blade is binding, it may walk up or kickback from the workpiece as the
saw is restarted.
7.
Support large panels to minimize the risk of blade pinching and
kickback. Large panels tend to sag under their own weight. Supports
must be placed under the panel on both sides, near the line of cut and
near the edge of the panel.
8. Blade depth and bevel adjusting locking levers must be tight and
secure before making cut. If blade adjustment shifts while cutting, it
may cause binding and kickback.
9. Use extra caution when making a plunge cut into existing walls or
other blind areas. The protruding blade may cut objects that can
cause kickback.
VIBRATION PRECAUTIONS
1.
This tool vibrates during use. Repeated or long-term exposure to
vibration may cause temporary or permanent physical injury. Take
frequent breaks when using the tool.
2. If you feel any medical symptoms related to vibrations (such as
tingling, numbness, and white or blue fingers), seek medical attention
as soon as possible.
3.
Wear suitable gloves to reduce the effects of vibration.
4.
DO NOT use this tool before consulting a physician if one of the
following applies:
a.
Pregnant
b. Impaired blood circulation
to the hands
c.
Past hand injuries
d. Nervous system disorders
e.
Diabetes
f.
Raynaud's Disease
