9049065
20V 4-1/2 in. Li-ion Cordless Mini Circular Saw
V1.0
14
For technical questions call 1-800-665-8685
INSTALLING AND ADJUSTING THE FENCE
1.
Loosen the fence lock
knob (M).
2. Insert the fence (L) through
one of the slots (Fig. 1-1) on
either side of the shoe. Push
the fence through until it
extends out to the
opposite side.
3.
Slide the fence to the desired
cutting width.
IMPORTANT! The ruler on the fence
shows the approximate cutting
width. The fence can be removed completely if needed.
4.
Tighten the fence lock knob.
OPERATION
WARNING! To reduce the risk of serious injury, ensure the following
precautions are followed before operation: the guards are in place and in
proper working order; the depth lever, bevel lock knob and fence lock knob
are tightened.
1.
Hold the grip (E) firmly with one hand.
2. Align the saw along the cut line with the larger part of the workpiece
on the left side of the saw blade. Press the laser guide button (P) to
turn the laser guide on.
3.
Push in and hold the trigger lock (F), then press the trigger (G).
4.
Allow the blade to reach full speed before contacting the workpiece.
IMPORTANT! Wood fibers can lift and tear when cutting across the grain.
Move the saw slowly to minimize any tearing.
7.
After completing the cut, release the trigger. Ensure that the lower
guard closes immediately. Press the laser guide button again to turn
the laser guide off.
WARNING! After using, remove the battery pack and clean the insides of the
upper guard. Sawdust accumulation interferes with the functionality of the
lower guard.
1-1
Fig. 1
