a.
Use clamps or a vice to hold down smaller workpieces.
2.
Use special care when working on corners, sharp edges or flexible
material. These workpieces have a tendency to snag the rotary bit.
3.
Only use the rotary bit designed for the tool.
4.
Support large panels to minimize the risk of pinching the rotary bit. Large
panels may sag under their own weight. Place supports under the panel
on both sides of the work area. Place other supports under the rest of the
panels to prevent them from falling.
5.
Always make sure the work surface is free from nails and other foreign
objects. Cutting into a nail can cause the rotary bit and tool to jump and
damage the bit.
6.
Maintain the cutting edge of the tool. A dull edge is more likely to slip
from the workpiece.
VIBRATION PRECAUTIONS
1.
This tool vibrates during use. Repeated or long-term exposure to vibration
may cause temporary or permanent physical injury. Take frequent breaks
when using the tool.
2.
If you feel any medical symptoms related to vibrations (such as tingling,
numbness, and white or blue fingers), seek medical attention as soon as
possible.
3.
Wear suitable gloves to reduce the effects of vibration.
4.
DO NOT use this tool before consulting a physician if one of the following
applies:
a.
Pregnant
b.
Impaired blood circulation to the hands
c.
Past hand injuries
d.
Nervous system disorders
e.
Diabetes
f.
Raynaud's Disease
UNPACKING
WARNING! Do not operate the tool if any part is missing. Replace the
missing part before operating. Failure to do so could result in a
malfunction and personal injury.
9011438
CORDLESS ROTARY TOOL KIT, 40 PC
V1.0
www.princessauto.com / 1-800-665-8685
Page 8
