V4.0
20 in. 4-in-1 Self-Propelled Lawn Mower
8925521
Visit www.princessauto.com for more information
11
d. Empty the bag, then reinstall it onto the mower.
6. Shut the engine off before removing stuck clippings. Use a brush or similar
tool when removing clippings from any discharge chute or the main
casing. Do not use your hands or feet.
CARE & MAINTENANCE
1. Maintain the tool with care. A tool in good condition is efficient, easier to
control and will have fewer problems.
2. Inspect the tool components periodically. Repair or replace damaged or
worn components. Only use identical replacement parts when servicing.
3. Keep the tool handles clean, dry and free from oil/grease at all times.
4. Maintain the tool’s labels and name plates. These carry important information.
If unreadable or missing, contact Princess Auto Ltd. for replacements.
WARNING! Only qualified service personnel should repair the tool. An
improperly repaired tool may present a hazard to the user and/or others.
REPLACE THE BLADE
CAUTION! Wear gloves to avoid a cutting your hands while replacing the
lawn mower blade.
NOTICE! Do not flip the lawn mower over to change the blade. This can
cause fuel and/or oil to leak. Tip the lawn mower upward and reach under
the unit.
1. Shut the engine off and allow it too cool.
2. Lift the lawn mower front enough to access the glad from underneath.
a. You can place the lawnmower on sawhorses for easier access. Make
sure the wheels are not on the sawhorses to avoid unwanted
movement.
3. Hold the blade by gloved hand or brace it with a chunk of wood. Loosen
the nut with a wrench, then remove the nut and washer by hand.
4. Remove the blade for sharpening or dispose of it.
5. Place the washer on the bolt in preparation for the following steps.
