1
GENERAL INFORMATION
This manual applies to the following Mean Green Products equipment lines:
Mean Green Mowers – 48”- 52” Nemesis NXR Zero Turn Model
To the new owner
The purpose of this manual is to assist owners and operators in maintaining and operating the mower.
Please read it carefully; information and instructions furnished can help you achieve years of
dependable performance. It is the
owner’s responsibility
to make certain that the operators and
mechanics read and understand this manual and all decals before operating this machine. It is also the
owner’s responsibility
to make certain that the operators and mechanics are qualified and physically
able individuals, properly trained in the operation of this equipment. All operators and mechanics must
become familiar with the safe operation of the equipment, operator controls and safety signs. Never let
children or untrained people operate or service the equipment. Local regulations may restrict the age of
the operator. The owner/user can prevent and is responsible for accidents or injuries occurring to
themselves, other people or property.
Using this manual
General operation, adjustment and maintenance guidance is outlined for both the experienced and
novice Mean Green Mower
user. Operating conditions vary considerably and cannot all be addressed
individually. Through experience, however, operators should find no difficulty in developing good
operating skills suitable to most conditions. Directions used in this manual, for example RIGHT or
LEFT, refer to directions when seated on the mower/standing facing forward, unless otherwise stated.
Photographs and illustrations used were current at the time of printing, but subsequent production
changes may cause your machine to vary slightly in detail. Mean Green Products reserves the right to
redesign and change the machine as deemed necessary, without notification. If a change has been made
to your machine which is not reflected in this owner’s manual, or the parts manual, see your Mean
Green Products
dealer for current information and parts.
Warranty registration
The Owner must register the unit by filling out the Warranty Registration Form, provided in the
owner’s packet, to validate your warranty protection. As the new equipment owner, you are
expected to see that this is done at the time of delivery. If using the Warranty Registration Form, it
MUST be completed and signed by the authorized dealer and original purchaser.
Be sure to register the mower plus each attachment that displays a model and serial identification
number plate with Mean Green Products.
IMPORTANT:
Any unauthorized modification, alteration, or use of non-approved attachments voids the
warranty and releases Mean Green Products from any liability arising from subsequent use of this
equipment.
Model and serial number
The mower serial number is found on the serial identification plate located on the right inside
wall of the electronics compartment of the mower under the seat.
The model is the type of Mean
Green Mower purchased i.e. MGP-20, CXR-52, SK-48 etc. The serial numbers and model are required
on the Warranty Registration form. They will also assure you of the correct service parts when
replacement becomes necessary.
Parts and service
All warranty repair and service must be handled through an
authorized Mean Green Products
dealer. Arrangements should be made
through your local service center.
