8917502
3-Bike Rear Mount Rack
V4.0
8
For technical questions call 1-800-665-8685
4. Strap the bike crossbar into the cradles. Pull the
strap down until it stretches. Push an opening in
the strap over the anchor tab. Release the strap
and it should lock in place.
5. Load a second bike facing in the opposite
direction and repeat steps 2 to 4.
6. Load the third bike in the same direction as the
first and repeat steps 2 to 4.
7. Secure each front bike tire with additional straps.
CARE & MAINTENANCE
1. Maintain the device with care. A device in good condition is efficient, easier
to control and will have fewer problems.
2. Inspect the device components periodically. Repair or replace damaged or
worn components. Only use identical replacement parts when servicing.
3. Maintain the device’s labels and name plates. These carry important
information. If unreadable or missing, contact Princess Auto Ltd. for
replacements.
WARNING! Only qualified service personnel should repair the device. An
improperly repaired device may present a hazard to the user and/or others.
CLEANING
Clean the bike rack with a damp cloth using only gentle detergents. Allow the
bike rack time to dry to prevent corrosion.
DISPOSAL
Recycle a device damaged beyond repair at the appropriate facility.
TROUBLESHOOTING
Visit a Princess Auto Ltd. location for a solution if the device does not function
properly or parts are missing. If unable to do so, have a qualified technician
service the device.
Fig. 9
