8819427
2 Bike Trunk Mount Bike Rack
V4.0
4
For technical questions call 1-800-665-8685
SPECIFIC SAFETY PRECAUTIONS
WARNING! DO NOT let comfort or familiarity with product (gained from
repeated use) replace strict adherence to the device safety rules. If you use
this device unsafely or incorrectly, you can suffer serious personal injury.
1. Use the correct device for the job. This device was designed for a specific
function. Do not modify or alter this device or use it for an unintended purpose.
2. Do not use the device if any parts are damage broken or misplaced. Repair
or replace the parts.
UNPACKING
WARNING! Do not operate the device if any part is missing. Replace the
missing part before operating. Failure to do so could result in a malfunction
and personal injury.
Remove the parts and accessories from the packaging and inspect for damage.
Make sure that all items in the parts list are included.
ASSEMBLY & INSTALLATION
Numbered references in parenthesis (#1) refer to the included Parts List.
Dashed numbers in parenthesis (Fig. 1-1) refer to a specific point in an
illustration or image.
A 13 mm wrench and a 10 mm wrench are required for assembly.
1. Slide the middle support (#3) assembly into the
bottom support (#10) assembly. Align the bolt
holes (Fig. 1).
2. Slide a buckle assembly (#2) onto the M6x40 hex
head cap bolt (#8) with the buckle side facing
away from the frame.
3. Insert the bolt through the set of bolt holes below
the struts. Slide a second buckle assembly onto
the bolt. This buckle also faces away from the
frame (Fig.1)
4. Thread an M6 locknut (#9) onto the bolt and tighten with a wrench.
Fig. 1
