Power Fist 8814436, User Manual

Page: 5 / 16

V4.0 9 pc Slide Hammer Dent Puller Kit 8814436
Visit www.princessauto.com for more information 5
IDENTIFICATION KEY
A Puller Hook
B Steel Nose Cone
C Slide Hammer Shaft
D Slide Hammer Weight
E Handle Guard
F Handle
G Pierce Punch
H Puller Hook
I Angle Puller
J Plate Edge Puller
K 5/8 to 1 in. Adapter
L Tapping Screw
ASSEMBLY & INSTALLATION
Letter references in parenthesis (A) refer to the included Identification Key.
1. Remove the slide hammer’s weight (D) from the shaft (C) and set aside.
2. Screw the handle guard (E) onto the shaft to the end of the threads. Screw
the handle (F) onto the shaft until it touches the handle guard. Tighten the
handle guard against the handle to lock the latter in place.
3. Slide the weight onto the shaft until it is against the handle guard.
4. Place the tool on a workbench or other surface and screw one of the
attachments onto the shaft.
a. Attach a hook (A and H) or the pierce punch (G) by screwing it into the
steel nose cone (B).
b. Insert the tapping screw (L) into the steel nose cone (B).
c. Screw the angle puller (I) or plate edge puller (J) directly onto the shaft.
d. Screw the 5/8 to 1 in. adapter (K) onto the shaft when using a larger
attachment.
Fig. 1