8757783
18V Cordless Tire Inflator
V4.0
6
For technical questions call 1-800-665-8685
5. A battery-operated tool with internal batteries or with a separate battery
pack must only be powered by the included battery. Do not mix different
brands of tools and batteries or use adapters to allow you to use a battery
pack with a different voltage. This can damage the tool’s electrical
mechanism and create a fire hazard.
6. Do not disassemble or crush the battery as the contents are corrosive and
flammable. Exposure may cause an injury. There is a risk of escaping
hazardous vapors. These vapors can irritate the respiratory track. Always
ensure proper ventilation and immediately consult a doctor, if you feel
unwell.
7. If fluids leak from the battery, avoid contact. Leaking battery fluid can
cause irritation of the skin or burns. If contact should occur, flush
immediately with water. In case of accidental contact with the eyes, seek
medical aid.
8. Do not disconnect from the power source in place of using the ON/OFF
switch on the tool. This can lead to an accidental startup when the tool is
connected to the power supply.
9. Do not allow a rechargeable battery to fully discharge. This will damage the
battery. Recharge the battery as soon as possible
10. Discontinue using or charging a li-ion battery if it changes shape or is
abnormally hot. The battery may leak or ignite. Move the battery to a fire
proof location and observe for 15 minutes. Safely dispose of the battery.
CHARGER SAFETY PRECAUTIONS
WARNING! Voltage is present at the charging terminals, do not probe with
conductive objects. Electric shock or electrocution may result. A battery
short can cause a large current flow, overheating, possible burns and even
a breakdown of the tool.
Before using the charger, read all instructions and cautionary markings on the
charger, battery pack and the product using the battery pack
.
1. Only use the included battery charger to recharge the battery. Other
chargers may be unsafe, causing an electrical short circuit or fire.
2. Disconnect the charger from its power source before attaching or
removing batteries or battery clamps.
