V 4.0
4.2 GPM @ 4,000 PSI Gas Pressure Washer
8643926
Visit www.princessauto.com for more information
9
C Water Outlet –
To connect high pressure hose.
D Water Inlet with Filter Screen –
Connect garden hose here. A filter
screen must be in place at the end of the hose to prevent debris from
entering the pump.
E Red Shipping Plug Attached with Vent Plug –
The pump is shipped with a red
shipping plug to prevent oil leaking during transportation. Replace with the
attached vent plug before using.
F Pump Head Build with Thermal Relief System –
Cycles water through the
pump when the water reaches 125° to 155° F. Warm water will discharge from
pump onto ground. This system prevents internal pump damage.
G Folding Handle Push Bar
– Push bar down to release handle. Fold handle
for storage.
H Air Filter
– Protects engine by filtering dust and debris out of intake air.
I
Fuel Tank –
Fill tank with regular unleaded fuel.
J
Choke Lever –
Prepares a cold engine for starting.
K Fuel Valve –
ON/OFF lever to control fuel flow to the engine.
L Throttle Lever –
Sets engine in starting mode for recoil starter.
M Recoil Starter –
Use for starting the engine manually.
N Spray Nozzles –
0°/15°/25°/40° and soap nozzle for various high pressure
cleaning applications.
O Spray Gun –
Controls the application of water onto cleaning surface with
trigger device. Includes trigger lock.
P High Pressure Hose –
Connect one end to the water pump and the other end
to the spray gun.
Q Spray Gun Wand with Quick Connect –
Attach spray nozzle to wand, based on
the cleaning requirement.
R Ignition Switch –
Turn switch to the ON position to start the engine. Set switch
to OFF to stop engine. Consult the Engine Manual for full instructions.
S Oil Fill Cap –
Fill engine with oil here.
Bypass Mode:
In bypass mode, the high pressure pump recirculates water when
the spray gun is not in use.
