V 4.0
Flip Front Welding Helmet
8620957
NOTICE!
This notice indicates that a specific hazard or unsafe practice will
result in equipment or property damage, but not personal injury.
WORK AREA
1. Operate in a safe work environment. Keep your work area clean, well lit and
free of distractions.
2. During welding operation, dust containing chemicals known to cause
cancer and birth defects may be produced. In order to reduce risk,
adequate ventilation when welding is necessary and important.
3. Keep anyone not wearing the appropriate safety equipment away from
the work area.
4. Store unused tools properly in a safe and dry location to prevent rust or
damage. Lock tools away and keep out of the reach of children.
PERSONAL SAFETY
WARNING! Wear personal protective equipment approved by the
Canadian Standards Association (CSA) or American National Standards
Institute (ANSI).
PERSONAL PROTECTIVE EQUIPMENT
1. Always wear impact safety goggles that provide front and side protection
for the eyes. Eye protection equipment should comply with CSA Z94.3-07
or ANSI Z87.1 standards based on the type of work performed.
CAUTION! The lens is breakable and does not provide complete protection
from flying particles.
2. Wear gloves that provide protection based on the work materials or to
reduce the effects of tool vibration.
3. Wear protective clothing designed for the work environment and tool.
4. Non-skid footwear is recommended to maintain footing and balance in the
work environment.
5. Wear steel toe footwear or steel toe caps to prevent a foot injury from
falling objects.
6. Wear a NIOSH approved respirator when working on materials that
produce hazardous fumes, dust or particulate matter.
Visit www.princessauto.com for more information
3
