8532251
7.5A Rotary Hammer
V4.0
6
For technical questions call 1-800-665-8685
10. Before using the tool on a workpiece, test the tool by running it at the
highest Speed Rating for at least 30 seconds in a safe position. Stop
immediately if there is any abnormal vibration or wobbling. Check the tool
to determine the cause.
a. Do not allow the tool to run without load for an extended period of
time, as this will shorten its life.
11. Never use a tool with a cracked or worn tool accessory. Change the tool
accessory before using it.
12. Do not place the tool down until the tool’s accessory has stopped moving.
The accessory may catch the surface of work material and wrench itself
free, causing injury to the user or others in the work area.
13. Hold the tool by the insulated gripping surfaces when performing an operation
where the tool may contact hidden electrical wiring. The tool’s exposed metal
surfaces may convey a shock to the operator from a ‘live’ wire.
ELECTRICAL SAFETY
WARNING! Do not touch or handle a live tool with any part of your body that
is wet or damp. Wet skin reduces resistance to electrical current,
increasing the danger of a serious or fatal shock.
WARNING! To reduce risk of electric shock, be certain that the plug is
connected to a properly grounded receptacle.
1. Disconnect the tool from the power supply before making any adjustments,
changing accessories, cleaning, servicing or when storing. Such preventive
safety measures reduce the risk of starting the tool accidentally.
2. Do not expose the tool to rain, snow, frost or any other damp or wet
conditions. Water entering a tool will increase the risk of electric shock.
3. Do not alter any parts of the tool or accessories. All parts and accessories are
designed with built-in safety features that may be compromised if altered.
4. Make certain the power source conforms to requirements of your
equipment (see Specifications).
5. A polarized plug has two blades of different widths, allowing only one way
to insert the plug into the outlet. If the outlet does not accept a polarized
plug, contact a qualified electrician to install a polarized outlet. Do not alter
the plug, as this may compromise the built-in safety feature.
WARNING! All wiring should be performed by a qualified electrician.
