8532251
7.5A Rotary Hammer
V4.0
2
For technical questions call 1-800-665-8685
SPECIFICATIONS
Voltage Rating
120V AC
Amperage Rating
7.5A
Frequency Rating
60 Hz
Impact Rate
2,920 IPM
Handle Type
D-handle
Handle Material
Plastic
INTRODUCTION
The 7.5A Rotary Hammer can drill through 1-9/16 in. thick wood, 1-3/32 in.
thick concrete and 5/8 in. thick steel. The drill is equipped with a D-handle and
side handle for optimum control.
SAFETY
WARNING! Read and understand all instructions before using this tool. The
operator must follow basic precautions to reduce the risk of personal injury
and/or damage to the equipment.
Keep this manual for safety warnings, precautions, operating or inspection and
maintenance instructions.
HAZARD DEFINITIONS
Please familiarize yourself with the hazard notices found in this manual. A notice
is an alert that there is a possibility of property damage, injury or death if certain
instructions are not followed.
DANGER! This notice indicates an immediate and specific hazard that
will
result in
severe personal injury or death
if the proper precautions
are not taken.
7.5A Rotary Hammer
