8502494
6 in. Bench Mount Buffer
V4.1
4
For technical questions call 1-800-665-8685
6. Wear steel toe footwear or steel toe caps to prevent a foot injury from
falling objects.
7. Wear the appropriate rated dust mask or respirator.
8. This tool can cause hearing damage. Wear hearing protection gear with an
appropriate Noise Reduction Rating to withstand the decibel levels.
PERSONAL PRECAUTIONS
Control the tool, personal movement and the work environment to avoid
personal injury or damage to tool.
1. Do not operate any tool when tired or under the influence of drugs, alcohol
or medications.
2. Avoid wearing clothes or jewelry that can become entangled with the
moving parts of a tool. Keep long hair covered or bound.
3. Do not overreach when operating a tool. Proper footing and balance
enables better control in unexpected situations.
SPECIFIC SAFETY PRECAUTIONS
WARNING! DO NOT let comfort or familiarity with product (gained from
repeated use) replace strict adherence to the tool safety rules. If you use
this tool unsafely or incorrectly, you can suffer serious personal injury.
1. Use the correct tool for the job. This tool was designed for a specific
function. Do not modify or alter this tool or use it for an unintended purpose.
2. Make sure the power switch is in the OFF position before connecting the
tool to the power supply.
3. Never use a tool with a damaged or worn buffing wheel. Change the
component before using.
4. Do not start the tool when the buffing wheel is touching the workpiece.
5. Before using the tool on a workpiece, test the tool by running it at the highest
no-load speed for at least 30 seconds in a safe position. Stop immediately if
there is any abnormal vibration or wobbling that could indicate poor
installation of the buffing wheel. Check the tool to determine the cause.
6. Do not allow persons who are not familiar with the tool or have not read
these instructions to use the tool.
