8502494
6 in. Bench Mount Buffer
V4.1
10
For technical questions call 1-800-665-8685
ON/OFF ROCKER SWITCH
A single rocker switch controls the power supply to the buffer. Push the switch
up to turn the buffer ON. The switch will lock in place. Push it down to turn the
power OFF.
The rocker switch has a removable yellow key. Remove the key from the switch
to prevent power from reaching the motor. The rocker switch won’t function or
lock into place without the key.
CARE & MAINTENANCE
1. Maintain the tool with care. A tool in good condition is efficient, easier to
control and will have fewer problems.
2. Inspect the tool components periodically. Repair or replace damaged or
worn components. Only use identical replacement parts when servicing.
3. Follow instructions for lubricating and changing accessories.
4. Only use accessories intended for use with this tool.
a. Replacement buffing wheels must have a minimum rating of 3,600
RPM and maximum diameter of 6 in.
5. Maintain the tool’s labels and name plates. These carry important information.
If unreadable or missing, contact Princess Auto Ltd. for replacements.
WARNING! Only qualified service personnel should repair the tool. An
improperly repaired tool may present a hazard to the user and/or others.
DISPOSAL
Recycle a tool damaged beyond repair at the appropriate facility.
Contact your local municipality for a list of disposal facilities or by-laws for
electronic devices, batteries, oil or other toxic liquids.
TROUBLESHOOTING
Visit a Princess Auto Ltd. location for a solution if the tool does not function
properly or parts are missing. If unable to do so, have a qualified technician
service the tool.
