2
For technical questions call: 1-800-665-8685
4200186
V 3.02
4-Way 25 ft
Trailer Harness
SPECIFICATIONS
Type
Y-Harness
Receptacle
Flat
Pins
4
Wire Length 25 feet
Contents
4 ft Trunk Connector, Splices, Clips
Requires a turn signal converter (sold separately) if the
vehicle’s turn signals are separate from the stop light.
IMPORTANT SAFETY PRECAUTIONS
WARNING! Read and understand all instructions before using the product. The operator must follow
basic precautions to reduce the risk of personal injury and / or damage to the equipment. Before
allowing someone else to use the product, make sure they are aware of all safety information.
WARNING! The warnings, cautions and instructions discussed in this instruction manual cannot
cover all possible conditions and situations that may occur. Common sense and caution are factors
that cannot be built into this product, but must be supplied by the operator.
NOTE: Keep this manual for the safety warnings, precautions and operating, inspection and
maintenance instructions.
PERSONAL SAFETY
1. Dress properly by wearing protective equipment. Use foot, hand and head protection. Always
wear ANSI approved impact safety goggles, which must provide both frontal and side
protection. Protect your hands with suitable gloves. Protect your head from falling objects by
wearing a hard hat. Protective, electrically non-conductive clothes and non-skid footwear are
recommended when working. Wear steel-toed boots to prevent injury from falling objects.
2. Do not over reach; keep proper footing and balance at all times. Proper footing and balance
enables better control of tools in unexpected situations.
3. Stay alert, watch what you are doing and use your common sense. Do not operate any
machine or tool when you are tired, under the influence of drugs, alcohol or medications.
