2.9 GPM @ 2,500 PSI Electric Wall-Mount Pressure Washer
12
For technical questions call 1-800-665-8685
8242273
V 2.9
MAINTENANCE
1. Maintain the tool with care. A tool in good condition is efficient, easier to control and will have fewer problems.
2. Inspect the tool components periodically. Repair or replace damaged or worn components.
3. Follow instructions for lubricating and changing accessories.
4. Keep the tool handles clean, dry and free from oil/grease at all times.
5. Inspect the tool fittings, alignment and hoses and power supply cord periodically. Have damaged or worn
components repaired or replaced by an authorized technician.
6. Maintain the tool’s label and name plate. These carry important information. If unreadable or missing, contact
Princess Auto Ltd. for replacements.
CAUTION! Only qualified service personnel should repair the tool.
STORAGE
When placing the pressure washer into storage, follow this procedure:
1. Thoroughly clean the injector valve and clear hose (#24) with clean water.
2. With the motor still on, squeeze the trigger for 1 minute using clean water to clean the system of contaminants.
3. Ensure the oil level in the pump reservoir is at the red dot in the middle of the sight glass. Do not over fill or
under fill pump oil.
4. Store inside or cover with a waterproof tarpaulin and tie it securely around the machine.
5. Do not allow children to play on or around the stored unit.
6. Flush both the water inlet and clear hose with clean water when starting to use again.
