1.6 GPM @ 2,000 PSI Electric Pressure Washer
5
Visit www.princessauto.com for more information
8465437
V 3.01
PARTS IDENTIFICATION
Remove the parts and accessories from the packaging and inspect for damage. Make sure that all items in the parts
list are included.
WARNING! Do not operate the tool if any part is missing. Replace the missing part before operating. Failure to
do so could result in a malfunction and personal injury.
Contents:
1. Pump outlet
2. Spray gun/wand holder
3. ON/OFF switch
4. Trigger lock
5. High-pressure hose connector
6. Spray gun
7. Adjustable spray wand
8. Turbo spray wand
9. High pressure hose
1
3
2
9
10
11
13
14
15
16
17
12
4
5
7
8
6
10. Transport handle
11. Hose reel crank
12. Detergent suction tube
13. Detergent bottle holder
14. Detergent bottle
15. Wheels
16. Water inlet with garden hose connector
17. Power cord with Ground Fault Circuit Interrupter (GFCI)
ASSEMBLY
When this manual refers to a part number, it refers to the included Parts Identification section.
1. Ensure the ON/OFF switch (#3) is in the OFF/0 position.
2. Attach the high pressure hose (#9) to the gun (#6). Use a wrench to tighten the fitting. (Fig. 2)
3. Insert the adjustable spray wand (#7) into the gun. Press in against the spring tension and twist clockwise
into locked position. (Fig. 3)
4. Remove the plastic cap from the pump outlet (#1) on the front of the pressure washer and discard. Then
attach the high-pressure hose to the pump outlet. Tighten the fitting to prevent water leaks. (Fig. 4)
Fig. 2
Fig. 1
Fig. 3
Fig. 4
