Power Electronics SD700SP Series, Hardware And Installation Manual

Page: 55 / 61

POWER ELECTRONICS SD700SP
COMMISSIONING
53
EN
Check that the drive protective covers are mounted and doors are
properly closed.
Check control, and analogue and digital signals cables, functions. Voltage
free.
Check that the drive follows the remote and local speed commands.
Verify that the display is turned on and set the drive control parameters
(Follow the instruction delivered in Software and Programming manual).
Check line voltages displayed.
Start the drive without motor
using the display’s keyboard pushbutton
“START”.
Check that the fans rotate smoothly and there is any obstacle reducing
the cooling capacity.
Connect the motor and check its rotation direction.
Check that the drive follows the references of speed, current, etc.
Connect input power supply.