7
•
Adjustable / Twisting Handle
The handle of the screwdriver may be
angled or twisted for ease of control. The
handle is fixed in position by a locking
switch beside the forward / reverse
switch. To adjust the handle angle, push
and hold this switch forward and at the
same time move the handle to the desired
position. Release the switch when handle in position to lock in
place. (See diagram 3)
•
Charging and recharging
Your screwdriver should be charged for a
period of 10-12 hours initially. Connect
the charger adaptor plug to the charging
socket of the screwdriver and then
connect the charger adaptor to the mains
supply. The red battery charge indicator
will illuminate to indicate charging.
Whilst charging, the charger and screwdriver may become warm to
touch – this is normal and does not indicate a problem.
CAUTION: WARNING. The charger will not automatically
switch off when battery is fully charged and the red indicator light
will remain on. Switch charger adaptor off when charging has been
completed and remove from power supply. Do not exceed 12 hours
charging as this will damage the batteries. Do not leave the
screwdriver on charge continuously. The battery charger adaptor
should only be used indoors.
