![background image](http://html.mh-extra.com/html/power-craft/79890/79890_instruction-manual_1586408030.webp)
30
GB
Instruction manual
Read the instruction manual
carefully before use, and keep it for
future reference.
Voltage/frequency
Indicates the required voltage and
frequency of the power supply to
which the machine is connected.
Power rating
Indicates the machine’s maximum
power.
Max
Max. l/min
Specifies the maximum capacity in
litres per minute.
Max
Max. point float
Specifies the float’s maximum
point.
Max. depth pump
Specifies the maximum depth to
which the pump can be lowered.
Max. height
Specifies the maximum height.
Min
Min. point float
Specifies the float’s minimum
point.
SUBMERSIBLE PUMPS
Introduction
To get the most out of your new
submersible pump, please read through
these instructions and the attached safety
instructions before use. We also recommend
that you save the instructions in case you
need to remind yourself of the pump’s
functions at a later date.
The submersible water pump is used for
pumping out water and other liquids from
garden ponds, pools, water butts, etc. and
can be used for draining flooded premises
in emergency situations.
Special safety instructions
The electrical connection must be protected
from water.
The pump must not be used for pumping
drinking water, salt water or flammable,
volatile, explosive, corrosive or abrasive
substances or liquids that are hazardous in
any other way.
Pumping very dirty or muddy water may
shorten the life of the pump.
The pump must not run empty.
The pump must not be exposed to frost.
Never insert your hand into the pump’s
suction inlet when it is in use or is
connected to the mains.
Always check the cord and plug before
using the pump, as defective cords may
cause electrical leakage on contact with
water, producing an electric shock.