![background image](http://html.mh-extra.com/html/power-craft/78107/78107_instruction-manual_1586404034.webp)
34
ENGLISH
INSTRUCTION MANUAL
Installing the cutting blade
Place the metallic guard (i) on the gear box flange
(f), install the 3 screws, washers and tighten.
Install and rotate the locating sleeve (k) until the
holes on the gear box (j) and the locating sleeve
align, insert the pin into the hole, then install the
cutting blade (l). Install the cutting blade press
plate (m), nut (n) and tighten. Remove the pin.
Operating Instructions
Filling up with fuel:
The engine uses a blend of unleaded petrol and
2-cycle engine synthetic oil mixed 25:1. The fuel
may not contain ethanol or methanol.
Shake the fuel tank prior to filling up since the
fuel/oil blend can separate after long times in
storage. Do not use fuel/oil blends that have been
stored for more than 1 month.
Remove the fuel cap (6) from the fuel tank (8)
and fill with fuel/oil blend. Attach the fuel cap
and ensure it will not loosen during operation.
Check before use:
Check whether the air filter cover (7) is clean and
replace if necessary.
Check the bush cutter for leaking fuel.
Starting the engine:
Check whether the ignition switch (12) is in the
ON/START position (p).
Fully press and release the manual fuel pump (s)
6 – 7 times until fuel has been pumped into the
engine.
Summary of Contents for 78107
Page 46: ...46 ILLUSTRATION ...
Page 47: ...47 PART LIST ...