![background image](http://html.mh-extra.com/html/power-craft/78107/78107_instruction-manual_1586404036.webp)
36
Cleaning and Maintenance
Air filter:
The air filter should be cleaned and re-oiled after
every 10 hours of use.
Remove the air filter cover by removing the screws.
Wash the filter in warm water with detergent. Allow
the filter to dry completely before replacing it.
Clean the inside of the locking frame with a moist
cloth.
Spark plug:
If the spark plug (3) is dirty, it needs to be cleaned
or replaced. Never replace the spark plug while the
engine is still hot to prevent damage.
Cleaning:
Wipe off the parts of the bush cutter with a moist
cloth. Lubricate the moving parts with lubricant.
Replacing the nylon line:
Push the locking block (t) on the side of the nylon
line spool housing, and open the housing carefully.
Take the empty nylon line spool (V) out and
replace it with a new one. Insert each end of the
line through one of the two holes in the nylon line
spool and reassemble the nylon line spool housing.
Only use 2.5 mm diameter replacement nylon line!
Environmental information
You can help protect the environment!
Follow local environmental regulations:
Dispose of unwanted electrical
equipment at an approved refuse
disposal centre.
ENGLISH
INSTRUCTION MANUAL
Summary of Contents for 78107
Page 46: ...46 ILLUSTRATION ...
Page 47: ...47 PART LIST ...