1. SWITCHING ON AND OFF
Never use the spindle lock until the machine is working.
To switch the machine on slide the on/off switch forwards.
To switch the machine off, depress the on/off switch, the switch will automati-
cally move
In the “off” position.
Never use the spindle lock to stop the motor.
2. MARKING THE WORK PIECES
Before starting with the biscuit jointer the work pieces must be marked as follow:
Place the two work pieces. Which must be connected, on top of each other.
Fasten the work pieces and mark the center of the groove.
The space between two grooves should be 10-15cm. This is not applicable for
smaller work pieces. Smaller work pieces don’t have to be marked.
3. POSITIONING OF THE MACHINE
Based on the size of the work pieces the machine can be positioned in several
ways.
4. LARGE WORK PIECES
Place the machine near the work piece.
The middle of the base plate (this point is marked on the base plate) must
face the center of the groove in the work piece, (see marking the work piece).
5. SMALL WORK PIECES
Place the machine near the work piece.
The side of the machine must be lacing the side of the work piece.
6. SAWING GROOVES
Move the motor base backward.
Place the machine near the work piece.
Position the machine (see positioning of the machine)
Hold the machine with both hands and switch the machine on.
Push the motor base carefully forward as far as possible.
Move the motor base backward and switch the machine off.
7. JOINING THE WORK PIECES
When the grooves in both work pieces have been made the workplaces can
be joined together.
Put glue in both grooves.
Technical specifications
Noise emission values
The noise is measured in accordance with EN 60745 (ISO 3744).
The machine may exceed 85 dB(A) at the workplace. In this case, noise
protection measures need to be introduced to protect the user.
Weighted root mean square acceleration value according EN 60745 (ISO5348).
13
12
Helpline No. UK / Northern Ireland 0870 112 1948 Rep. Ireland 0800 32 929292
Web Support:
www.clickspares.co.uk
Model Number: 6851
Helpline No. UK / Northern Ireland 0870 112 1948 Rep. Ireland 0800 32 929292
Web Support:
www.clickspares.co.uk
Model Number: 6851
Features
Voltage
230V
Frequency
50Hz
Power input
900W
No-load speed
11000rpm
Disc diameter
100mm
Blade bore diameter
22mm
Max. cutting depth
19mm
Fence adjustment
0° - 90°
Spindle dimension
M10
Weight
3.0kg
Sound pressure level Lpa
92 dB(A)
Sound power level Lwa
103 dB(A)
Vibration
1.4 m/s²
Instructions
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
