operation. If damaged, have the power tool repaired before use. Many ac-
cidents are caused by poorly maintained power tools.
Keep cutting tools sharp and clean. Properly maintained cutting tools with
sharp cutting edges are less likely to stick and are easier to control.
Use the power tool, accessories and tool bits etc., in accordance with these
instructions and in the manner intended for the particular type of power tool,
taking into account the working conditions and the work to be performed.
Use of the power tool for operations different from intended could lead to a
hazardous situation.
5. SERVICE
Have your power tool serviced by a qualified repair person using only identi-
cal replacement parts. This will ensure that the safety of the power tool is
maintained.
SPECIFIC SAFETY WARNINGS
Sawdust and splinters must not be removed while the machine is running.
Do not use cutting discs or circular saw blades in the machine.
Protect saw blades against shocks and impacts.
Only use property sharpened blades, otherwise increased cutting forces will
shatter the work piece.
Before use, inspect the saw blade for any damage. Do not use saw blades that
are cracked, ripped or otherwise damaged.
Make sure that the work piece is sufficiently supported or clamped. Keep your
hands away from |he surface to be cut.
Use the machine only with the auxiliary handle.
When saw blades have to be mounted on the thread of the spindle, make
sure that the spindle has sufficient thread.
Make sure that the saw blade has been mounted and fastened property. Do
not use reducing rings or adapters to make the saw blade fit properly.
Apply the machine to the work piece only when the machine is switched on.
When working with the machine always hold the machine firmly with both
hands and provide for secure distance.
Persons under 16 years of age are not permitted to operate this machine.
Always wear safety goggles, dust mask and hearing protection. If desired or
required also use another protection for example and apron or helmet
Always disconnected the plug from the socket before carry out any work on
the machine only plug-in when the machine is switched off
Keep mains lead clear from working range of the machine. Always lead the
cable away behind you.
The base plate must not be clamped down while the blade is extended.
Lowering and raising the blade must be a smooth operation.
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
07
06
Helpline No. UK / Northern Ireland 0870 112 1948 Rep. Ireland 0800 32 929292
Web Support:
www.clickspares.co.uk
Model Number: 6851
Helpline No. UK / Northern Ireland 0870 112 1948 Rep. Ireland 0800 32 929292
Web Support:
www.clickspares.co.uk
Model Number: 6851
Do not abuse the cord. Never use the cord for carrying, pulling or unplugging
the power tool. Keep cord away from heat, oil, sharp edges or moving parts.
Damaged or entangled cords increase the risk of electric shock.
When operating a power tool outdoors, use an extension cord suitable for
outdoor use. Use of a cord suitable for outdoor use reduces the risk of electric
shock.
If operating a power tool in a damp location is unavoidable, use a residual
current device (RCD) protected supply. Use of an RCD reduces the risk of elec-
tric shock.
3. PERSONAL SAFETY
Stay alert, watch what you are doing and use common sense when operating
a power tool. Do not use a power tool while you are tired or under the influ-
ence of drugs, alcohol or medication. A moment of inattention while operat-
ing power tools may result in serious personal injury.
Use safety equipment. Always wear eye protection. Safety equipment such as
dust mask, non-skid safety shoes, hard hat, or hearing protection used when-
ever conditions require will reduce personal injuries.
Avoid accidental starting. Ensure the switch is in the off position before plug-
ging in. Carrying power tools with your finger on the switch or plugging in
power tools that have the switch on invites accidents.
Remove any adjusting key or wrench before turning the power tool on. A
wrench or a key left attached to a rotating part of the power tool may result
in personal injury.
Do not overreach. Keep proper footing and balance at all times. This enables
better control of the power tool in unexpected situations.
Dress properly. Do not wear loose clothing or jewelry. Keep your hair, clothing
and gloves away from moving parts. Loose clothes, jewelry or long hair can be
caught in moving parts.
If devices are provided for the connection of dust extraction and collection
facilities, ensure these are connected and properly used. Use of these devices
can reduce dust related hazards.
4. POWER TOOL USE AND CARE
Do not force the power tool. Use the correct power tool for your application.
The correct power tool will do the job better and safer at the rate for which it
was designed.
Do not use the power tool if the switch does not turn it on and off. Any
power tool that cannot be controlled with the switch is dangerous and must
be repaired.
Disconnect the plug from the power source before making any adjustments,
changing accessories, or storing power tools. Such preventive safety measures
reduce the risk of starting the power tool accidentally.
Store idle power tools out of the reach of children and do not allow persons
unfamiliar with the power tool or these instructions to operate the power
tool. Power tools are dangerous in the hands of untrained users.
Maintain power tools. Check for misalignment or sticking of moving parts,
breakage of parts and any other condition that may affect the power tool’s
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
