![background image](http://html.mh-extra.com/html/power-craft/55999/55999_instruction-manual_1586360017.webp)
17
Fitting sanding disc
•
Select sandpaper with the appropriate grain
size for the task. Use coarse grain for rough
sanding and fine grain for fine sanding. A
smooth sole (no holes) is also supplied for
buffing.
•
Position disc with holes aligned with those on
sanding pad (3).
•
Press disc onto Velcro surface and check it is
secure.
USE
•
Remove vacuum extractor nozzle cover (6) if
connecting a vacuum cleaner.
•
Hold with both hands on the handle, and
switch on at on/off switch (1).
•
Apply the sander to the item. Give it time to
work. It is rarely necessary to press the pad
hard against the surface to be worked.
•
Avoid blocking the ventilation slots (2) with
your hand, as this may cause the sander to
overheat.
•
Switch off using on/off switch when finished.
ENGLISH
INSTRUCTION MANUAL
Cleaning and maintenance
•
Wipe the multisander using a well-wrung cloth
after use, and always keep the surface and
ventilation holes free of dirt.
•
Never use corrosive or abrasive detergents, as
they may affect the plastic parts on the
multisander.
Environmental information
You can help protect the environment!
Follow the applicable environmental
regulations: Dispose of unwanted
electrical equipment at an approved
refuse disposal centre.
Take out the batteries before scrapping the
product.