54
GB
shown as E in fi gure 10), to release the
moving blade guard (17). Push the blade
guard up fully, and push the cylinder in, so
the cleaver blade is lined up with the saw
blade. Check that there is suffi cient distance
between the cleaver blade and the saw
blade!
Press the saw head down, and secure it
using the lock button (17a, shown as G in
fi gure 12).
Press down the tilting fi xture (9, shown as
F in fi gure 13), and turn the workbench (7)
around the axle (8) until you hear a click.
Fit the permanent blade guard (27) to the
cleaver blade (18) by pressing the button on
the side of the blade guard.
Fit the mitre setter (26) and parallel guide
(25) on the workbench.
Fit the dust bag (28) to the underside of the
saw, or connect a vacuum cleaner to the
saw.
The saw can now be used as a circular saw.
bm
bo
bp
bq
bn
