![background image](http://html.mh-extra.com/html/power-craft/31111/31111_original-manual_1586373050.webp)
50
GB
Note: All the safety instructions must be
read and understood before attempting to
operate this appliance. Failure to comply
with these instructions may result in
personal injury, risk of � re or electric shock.
Safety information
• The equipment complies with the
safety regulations required for electrical
equipment.
• Read through the instructions for use
before starting up the equipment.
• Improper use can lead to personal injury
and property damage. persons, who are
not familiar with the instructions, may
not operate the equipment. Keep the
instructions for use in safe custody.
• Children and youths are not permitted to
operate the equipment.
Use According to Spec� cations
• The saw is designed as a non-mobile unit
for making longitudinal and cross cuts
in wood and similar materials. Round
timber of all types must not be cut with
the saw.
• The manufacture assumes no liability
whatsoever for improper use or if the
machine has been tampered with.
• Give equal attention to the safety
instructions, assembly and operating
instructions as well as prevailing accident
preventions regulations.
Safety Information
• Keep your work area clean and well lit to
prevent accidents.
• Don’t use electric devices close to
� ammable liquids or gasses or in in wet
or damp environments, if you fail to
observe this, there is a danger of � re or
explosion.
• Never leave the device when you air tired
or lack concentration or if your reactions
are impaired due to consumption of
alcohol or medication. Lack of attention
can lead to serious injury.
• Keep the tools clean and in good working
order in order to be able to work better
and safer.
• Don’t wear bulky clothing or jewellery.
• Make sure you can stand stably and have
shoes that won’t slip.
• Use a head cover if you have long hair.
• Loose clothing, jewellery, and long hair
can become entangled in moving parts,
always wear safety goggles
• Wear a dust mask when working with
materiais that produce dust.
• Wear ear protection if a lot of noise is
produced.
• Persons using the machines must not be
distracted.
• This could cause one to lose control over
the tool.
• Don’t use any device that has a faulty
on/off switch.
• An electric tool that can no longer be
switched on or off is dangerous and must
be repaired.
Summary of Contents for 31111
