Power Computing Power 100, User Manual

Page: 32 / 92

Upgrading Your Computer
14
Power 100/120 User Guide
For Technical Support, Call 1-800-708-6227
To remove the cover:
1.
Shut down the computer, turn off the monitor, and turn off the computer at
the main power switch on the back of the computer, but leave it plugged in.
Leaving the computer plugged in ensures that it is grounded.
2.
If the monitor is on top of the computer, disconnect it if necessary, and set
it aside.
Otherwise itÕs going to be awkward to remove the computer cover.
3.
Disconnect everything but the power cord from the back of the computer.
4.
Rotate the computer so that its back panel faces you.
5.
Remove the large thumb screw from the rear of the computer.
Put the thumb screw in your left front pocket or somewhere else where you wonÕt lose it.
6.
Pull apart the bottom corners of the cover, lift it off and set it aside.
0
I
Pull apart and lift off